Contact us for price
High Consisteny Cleaner made by Escher Wyss Type D2P-S Consistency range: 2,5-5% Throughput: ...
Contact us for price
High-consistency cleaner, made by Escher Wyss type D1P-S Throughput: 500 – 1000 l/min at consi...
Contact us for price
Deflaker, made Escher Wyss type E2K Throughput 800-1300 l/min Consistency max. 6% Capacity 75...
consisting of: 4 infeed chain conveyors, length approx. 7m each transfer device, bale grippin...
Contact us for price
Disc Filter, made by Hedemora diameter 5200 mm discs: 12/14 pc incl. drive and screw conveyor ...
Contact us for price
Disch Filter / Edge-Trim Drum Thickener, made by Voith incl. drive
Contact us for price
Disperger made by Andritz, 1994 type HD4B Capacity: 420 tpd, 30% Speed: 1000 U/min Motor: 18...
Contact us for price
Disperger made by Cellwood in 2012 type KD-1050 Capacity: 700 tpd, 30% Speed: 1000 U/min Mot...
Contact us for price
Disperger, made by Escher Wyss 1991 type HD4-B Consistency range: 25-30% Capacity (nominal): 3...
Complete Pulp Feeding System, made by FMW 2003 Capacity: 60 bales/h – Destacker 90 bales/h Cons...
Contact us for price
Flotation Cell made by Voith, 2006 type ECC5/41-P5.9L1 Capacity: 30.000 l/min Speed: 740 U/mi...
Contact us for price
Flotation Cell made by Voith, 1998 type ECC5/41 Capacity: 15.000 l/min Speed: 980 U/min Moto...
flow 180m³/h; made by Krofta, 1996; type Supercell SPC 18 Flow: 180 m³/h | Diameter: 5.500 mm | Height: 2.00...
Contact us for price
Fluffer made by Anthon B. Nilsen, 1994 type Mixer 42 Capacity: 420 tpd, 30% Motor: 315 kW Lo...
Contact us for price
Plate Press made by Anthon B. Nilsen, 1994 Pressure: 70 bar Motor: all 0,5 kW Motor Hydraulic...
Contact us for price
Plate Press made by Anthon B. Nilsen, 1994 type IX Formpresse Capacity: 450 tpd Bale dimensio...
Contact us for price
Double-wire press made by Andritz, year 1994 type DSP2824SH Capacity 250 tpd working width 28...
Contact us for price
Double wire press, made by Andritz Austria 1992 type SBP 2800 Working Width: 2800 mm Wire widt...
Contact us for price
diameter 620mm; perforated screen Ø 15mm made by Lamort, 2001 Located in France Diameter: 620 mm | Perforate...
Contact us for price
Drum Pulper (2 pc available) made by Andritz in 2003 type Fibreflow FF 375 Capacity: 850 tpd/ ...
Contact us for price
Reject Pulper, 53 m³ made by Valmet in 1993 equipped with: - 1 x pump, made Ahlstrom, flow 410...
Contact us for price
Edge Trim Pulper made by TM Systems in 2012, type Trimvac Volume approx. 20 m³ Flow rate 2500 ...
Contact us for price
Pulper, made Escher Wyss Type St 9 C-M Volume 70 m³ Capacity (Feed): 2800 kg at 4 % consisten...
Contact us for price
Pulper made by Escher Wyss 1973 (2 pc) and 1984 (2 pc) type S6 C-M Volume: 26m³ Capacity (feed...
Contact us for price
Double Disc Refiner, made Escher Wyss type DSR 3 HEP Consistency range: 3 – 6% Throughput at 3...
Contact us for price
High-angle conical Refiner, made by Bolton Emerson type Claflin 202 Serial no. 472-476 Consist...
Contact us for price
Low-Angle Conical Refiner, made ba Escher Wyss 1969 type R3 Consistency range: 2,5-6% 3pc avai...
Double-disc Refiner, made by Voith 2008 type Twin-Flo 1E Flow rate: 250 – 800 l/min at 4% consi...
Contact us for price
Pressure screen, made by Andritz type Moduscreen F10 basket with slots incl. drive
Contact us for price
Output 30 - 40 tpd made by Lamort, 1994; screens were installed in deinking line 150-200 t/day; P...
Contact us for price
holes Ø 1,8mm; slots 0,35mm; made by Lamort, 1994; screens were installed in deinking line 150-20...
Contact us for price
Bow screen, made by Hedemora, Sweden type TS2 incl. drive and screw conveyor
Contact us for price
Disch Filter / Edge-Trim Drum Thickener, made by Voith incl. drive